Author Topic: Swing Axle Boot Replacement Tools  (Read 1277 times)

Squiggle Dog

  • Moderator
  • Hero Member
  • *****
  • Posts: 523
  • IMA Universal Wagon Lover
    • View Profile
    • Fintail.org
Swing Axle Boot Replacement Tools
« on: July 13, 2020, 10:28:09 PM »
Goody, goody, gumdrop! I plan on replacing the rear axle boot on my roommate's 1965 W111 220S, and he got a great deal on these special genuine Mercedes swing axle boot replacement tools. One is boot staple pliers, part number 111-589-06-37-00, and the others are two spring compressors for removing the central compensating spring to access the boot, part number 111-589-00-31-00.

« Last Edit: July 14, 2020, 01:04:40 AM by Squiggle Dog »
Stop paying for animal enslavement, cruelty, and slaughter. Save your health and the planet. Go vegan! I did 17 years ago. https://challenge22.com/

1967 W110 230 Universal Wagon Project
1980 W116 300SD Turbo Diesel 346,000

drew56cus

  • Newbie
  • *
  • Posts: 20
    • View Profile
Re: Swing Axle Boot Replacement Tools
« Reply #1 on: July 14, 2020, 03:27:25 PM »
That is pretty cool that you got the proper tools! However, you don't need spring compressors to take that horizontal spring off the rear end, just put a block of wood on a jack under the end of the bracket as shown in green, undo the bolt circled, and let the bracket pivot about the remaining bolt. Installation is the reverse of this. (Hopefully i can figure out how to attach a picture).
Cheers, Drew
A few W111 and W112 projects...

Squiggle Dog

  • Moderator
  • Hero Member
  • *****
  • Posts: 523
  • IMA Universal Wagon Lover
    • View Profile
    • Fintail.org
Re: Swing Axle Boot Replacement Tools
« Reply #2 on: July 14, 2020, 03:36:07 PM »
Thanks for tip! The first time I did it, I just unbolted the bracket and let the spring shoot out. That was on a car I was parting out and I was excited to be getting $10 for the compensating spring... I also sold the complete wire harness for $50 and felt like maybe I was gouging the buyer. Wish I had it now.
Stop paying for animal enslavement, cruelty, and slaughter. Save your health and the planet. Go vegan! I did 17 years ago. https://challenge22.com/

1967 W110 230 Universal Wagon Project
1980 W116 300SD Turbo Diesel 346,000

drew56cus

  • Newbie
  • *
  • Posts: 20
    • View Profile
Re: Swing Axle Boot Replacement Tools
« Reply #3 on: July 23, 2020, 05:42:04 PM »
I should have also said that you should have the rear up on jack stands so that the suspension is on full droop, then the spring will be at its least energetic state (i.e less compressed).
A few W111 and W112 projects...

Cth350

  • Jr. Member
  • **
  • Posts: 80
    • View Profile
Re: Swing Axle Boot Replacement Tools
« Reply #4 on: July 23, 2020, 10:39:57 PM »
um, which car did you want a wire harness for exactly? -CTH

Squiggle Dog

  • Moderator
  • Hero Member
  • *****
  • Posts: 523
  • IMA Universal Wagon Lover
    • View Profile
    • Fintail.org
Re: Swing Axle Boot Replacement Tools
« Reply #5 on: July 24, 2020, 01:16:11 AM »
um, which car did you want a wire harness for exactly? -CTH

I need a wire harness for a 1966-1968 W111 sedan at some point. I'm going to be converting my 1967 W110 wagon into a W111 wagon, but the wire harness going to the headlights of the 1965 W111 donor body I have was cut, so I can't use the headlight portion of it anymore--and then I don't know if it would have worked out so well anyway, since they changed the style of connectors in 1966.
Stop paying for animal enslavement, cruelty, and slaughter. Save your health and the planet. Go vegan! I did 17 years ago. https://challenge22.com/

1967 W110 230 Universal Wagon Project
1980 W116 300SD Turbo Diesel 346,000

PeterPortugal

  • Newbie
  • *
  • Posts: 20
    • View Profile
Re: Swing Axle Boot Replacement Tools
« Reply #6 on: August 14, 2020, 03:56:15 PM »
Try this guy "Leonardo Peterssen". He posts on SL113.org as a supplier / restorer of Merc harnesses.

l.peterssen@mac.com


tram

  • Full Member
  • ***
  • Posts: 101
    • View Profile
Re: Swing Axle Boot Replacement Tools
« Reply #7 on: August 21, 2020, 01:12:57 PM »
um, which car did you want a wire harness for exactly? -CTH

I need a wire harness for a 1966-1968 W111 sedan at some point. I'm going to be converting my 1967 W110 wagon into a W111 wagon, but the wire harness going to the headlights of the 1965 W111 donor body I have was cut, so I can't use the headlight portion of it anymore--and then I don't know if it would have worked out so well anyway, since they changed the style of connectors in 1966.

You don't need a harness- you can use your w110.You need the jumper/ adapter for USA style stacked headlights- but a better plan would be a set of euro headlights which doesn't require it. You may need to jumper from terminal 56b to N on your headlamp switch to activate the fogs. That should be "it".
Life is sexually transmitted and fatal... so who needs airbags* and ABS?

*W112 excepted

Squiggle Dog

  • Moderator
  • Hero Member
  • *****
  • Posts: 523
  • IMA Universal Wagon Lover
    • View Profile
    • Fintail.org
Re: Swing Axle Boot Replacement Tools
« Reply #8 on: August 21, 2020, 02:31:05 PM »
You don't need a harness- you can use your w110.You need the jumper/ adapter for USA style stacked headlights- but a better plan would be a set of euro headlights which doesn't require it. You may need to jumper from terminal 56b to N on your headlamp switch to activate the fogs. That should be "it".

Is the W110 harness really long enough to reach the extra length of the W111 fenders? The length was my biggest concern, though I thought it possible the wires might be different, too. If so, that would be great. I will be using Euro headlights.
Stop paying for animal enslavement, cruelty, and slaughter. Save your health and the planet. Go vegan! I did 17 years ago. https://challenge22.com/

1967 W110 230 Universal Wagon Project
1980 W116 300SD Turbo Diesel 346,000